PRIAMUS
PRODUCTS

PRIAMUS
PRODUCTS

Products

SOLUTION-FOCUSSED ‒ MODULAR ‒ CUSTOMER-ORIENTED INNOVATIVE PRODUCTS FOR SPECIFIC REQUIREMENTS

The compatibility of our products is a major concern for us. Our sensor technology, connection technology, and hardware is modular and specially designed for a holistic process view. We collect pressure and temperature values in the mold and link these with other data from the injection molding machine and peripherals. With our solutions, we set quality standards in sensor technology, connection technology, and electronics.

FILLCONTROL

FILLCONTROL Software Architecture

Every injection molding process is different and requires its own tailor-made solution.

FILLCONTROL is the modular process monitoring system from PRIAMUS that can be flexibly adapted to individual customer requirements. Documenting, monitoring, open-loop or closed-loop process controlling – FILLCONTROL covers all applications with the appropriate module.

We create the data basis of FILLCONTROL by recording real process data within the mold. We are convinced that the data must be measured where the molding parts are actually produced – in the mold and not in the machine.

Downloads

FILLCONTROL FreeViewer

FreeViewer_2560x500

FILLCONTROL FreeViewer is a free software module and enables the recorded data of all FILLCONTROL applications to be clearly displayed and analyzed.

In addition, all process monitoring, open-loop and closed-loop control functions can be displayed using previously recorded data or simulation data in a simulation mode.

FILLCONTROL FreeViewer is ideally suited as a management tool for the planning, optimization and analysis of production.

Downloads

Application
Process visualization
Process analysis
Data analysis of all modules
Demo mode and simulation of all functions

Accessories
Windows PC / Laptop
BlueLine Core Type 8280C

FILLCONTROL Measure

Measure_2560x500

FILLCONTROL Measure is a free software module with which measurement data such as cavity pressure, cavity temperature or voltage signals can be easily recorded and stored.

All that is needed is a combined connection cable both to power the amplifiers and to transfer data to the Windows PC/laptop and amplifiers.

Downloads

Application
Data acquisition
Data storage
Process visualization
Process analysis

FILLCONTROL Monitor

Monitor_2560x500

FILLCONTROL Monitor is a comprehensive process monitoring module and serves as the basis for all PRIAMUS® systems. It offers the possibility of simple bad part separation such as the removal of individual bad parts with the help of individual alarm signals

In addition, FILLCONTROL Monitor offers the opportunity of detecting the melt position in the cavity, switching over to holding pressure automatically or via switching level and monitoring viscosities.

The quality-dependent monitoring parameters are divided into warning, intervention and alarm limits.

Application
Good / bad part separation
Switchover to holding pressure via switching level
Automatic switchover to holding pressure
Viscosity monitoring

Application	Problem	Example	Solution
General	Parts are not filled	Cable connector	Monitoring the pressure level
Coinjection	Uncontrolled filling	Food container	Monitoring the sheer rate
Family molds	Different length of flow paths	Model kits	Monitoring the individual cavities

Downloads

Data Sheet DS064e FILLCONTROL Edition 10.2019 (669.91 KB)

FILLCONTROL Switch

Switch_2560x500

FILLCONTROL Switch generates real-time switching signals on detection of the melt front and thus enables targeted open-loop process control depending on the flow process.

As soon as the melt in the cavity reaches the position of a cavity pressure sensor or a cavity temperature sensor, a switching signal is generated and used for appropriate switching operations depending on the application.

The switching signals can either be delayed or switched on and off depending on each other.

Application
Automatic sequential control
Valve gate nozzle control
Core pull control
Automatic venting
Rotary table applications
Automatic injection compressing molding

Application	Problem	Example	Solution
Overmolding of insert parts	Flow mark	Golf balls	Automatic core pull control
Sequential molding	Weld lines	Bumper	Automatic valve gate nozzle control
Liquid silicon rubber	Unequal compression	Heart catheter	Automatic valve gate nozzle control

Downloads

FILLCONTROL Control H

Fillcontrol_Control_H_2560x500

FILLCONTROL Control H is a module for the balancing of hot runner multi-cavity molds and fully automatic control of the melt flow in large-area components.

In this very effective process, the settings of the hot runner nozzles are permanently corrected depending on the respective melt flow in the cavity. This way, unfilled parts in multi-cavity molds are excluded and weld lines in large-area components are specifically controlled, moved and held in position.

This process is the prerequisite for a systematic reduction of cycle times for multiple molds.

Application
Hot runner balancing
Hot runner control

Application	Problem	Example	Solution
Multi-cavity molds	Different filling grade	Infusion systems	Automatic hot runner balancing
Ceramics injection molding	Dimensional variations	HID lamps
Multi-cavity molds	Cycle time too long	Contact lenses

Downloads

FILLCONTROL Control P

Fillcontrol_Control_P_2560x500

Due to material variations and different environmental conditions, bad parts are often produced with a constant machine setting.

FILLCONTROL Control P regulates the injection molding process fully automatically by permanently adjusting the machine parameters. This is the only way to ensure that molds can be transferred from one location to another.

In the end, the quality parameters such as compression, viscosity or the dimension of a molded part are directly controlled. A prerequisite for this is the separate measurement of the pressure and the temperature in the cavity.

Application
Automatic closed-loop process control

Application	Problem	Example	Solution
Processing of recycled materials	Viscosity variations	Tractor covers	Viscosity control
Precision injection molding	Dimensional variations	Blister packaging	Shrinkage control
Technical parts	Insufficient strength	Gear wheels	Compression control

Downloads

FILLCONTROL Control V

Fillcontrol_Control_V_2560x500

FILLCONTROL Control V balances and controls the melt flow, especially in cold runner molds, by automatically delaying the opening times of the valve gate nozzles.

Similar to hot runner multi-cavity molds, this leads to all cavities being filled at the same time. This is particularly important for silicone and multi-component applications.

This way, unfilled parts in multi-cavity molds are excluded and weld lines in large-area components are specifically controlled, moved and held in position.

In general, it is possible to regulate the opening times of each valve gate nozzle individually, which is effectively used for family molds, for example. The nozzles are opened in real time by detecting the melt front in the cavity, so no host computer interface is required.

Application
Valve gate nozzle balancing
Valve gate nozzle control

Application	Problem	Example	Solution
Liquid silicon rubber (LSR)	Different compressions	Overmolded airbag igniters	Automatic balancing and control of valve gate nuzzles
Family molds	Different volumes	Food container
Thermoplastic (LSR)	Unsteady volumes	Oxygen masks

Downloads

FILLCONTROL mobile monitoring system type 7090A-xpxT

FILLCONTROL MOBILE MONITORING SYSTEM TYPE 7090A-XPXT

Usually FILLCONTROL Monitor is permanently installed on the injection molding machine. The monitoring system type 7090A-xpxT is a mobile version for service, tests and laboratory applications for which all necessary BlueLine components such as connection cables, amplifiers and the BlueLine Core can be stored in a robust transport case.

Downloads

BlueLine Hardware

BlueLine Core type 8280C

BLUELINE CORE TYPE 8280C

The BlueLine Core is a powerful basic device for monitoring, open-loop and closed-loop process control of the injection molding process and serves as a platform for all FILLCONTROL software modules.

The BlueLine Core is equipped with a capacitive touch screen which can be easily operated even under production conditions.

The cleanroom-suitable device has a large number of digital interfaces via which all BlueLine devices are controlled.

A network connection is also possible via the Ethernet interface.

Downloads

BlueLine Pressure and Temperature Amplifier Type 5070A-2p2T-VARAN

BLUELINE PRESSURE AND TEMPERATURE AMPLIFIER TYPE 5070A-2P2T-VARAN

The pressure and temperature amplifier type 5070A-2p2T-VARAN processes two cavity pressure and two cavity temperature signals in a total of four channels.

Connector: 2 × Fischer type 102 TRIAX, 2 × Fischer type 101 TRIAX

Downloads

BlueLine Pressure Amplifier Type 5080-4p

BLUELINE PRESSURE AMPLIFIER TYPE 5080-4P

The BlueLine cavity pressure amplifier type 5080-4p processes cavity pressure signals on four channels.

Connector: 4 × Fischer type 102 TRIAX

Downloads

BlueLine Pressure Amplifier Type 5080-16p

BLUELINE PRESSURE AMPLIFIER TYPE 5080-16P

The BlueLine cavity pressure amplifier type 5080A-16p processes 16 cavity pressure signals.

Connector: 2 × Fischer type 104, 16-pin

Downloads

BlueLine Temperature Amplifier Type 5080A-4T

BLUELINE TEMPERATURE AMPLIFIER TYPE 5080A-4T

The BlueLine cavity temperature amplifier type 5080A-4T processes four cavity temperature signals.

Connector: 4 × Fischer type 101 TRIAX

Downloads

BlueLine Temperature Amplifier Type 5080A-16T

BLUELINE TEMPERATURE AMPLIFIER TYPE 5080A-16T

The BlueLine cavity temperature amplifier type 5080A-16T processes 16 cavity temperature signals.

Connector: 2 × Fischer type 106, 19-pin

Downloads

BlueLine Voltage Input Module Type 8983A

BLUELINE VOLTAGE INPUT MODULE TYPE 8983A

The BlueLine voltage input module is used for the simple recording of voltage signals as they are usually provided by injection molding machines.

These are usually setpoint and actual signals of the set machine parameters such as hydraulic pressure, screw position or injection speed.

The voltage signals are recorded in the FILLCONTROL software as analog signals and subsequently documented as quality parameters or used for control purposes.

The device is designed for installation in a control cabinet and is coupled to the I/O master via the "Bus In" connection.

Downloads

BlueLine Machine Interfaces

BLUELINE MACHINE INTERFACES

Important components of a measuring system are the interfaces. Our BlueLine interfaces I/O Master and I/O Expander are easily installed in the control cabinet and connected to the machine controller.

All control signals as well as all warning, intervention and alarm signals for reject separation are transmitted by the control system via a single hybrid bus cable. Our interfaces are modular and can be plugged together on a top-hat rail.

I/O MASTER TYPE 8980C

The I/O Master type 8980C is a basic module within the BlueLine system with digital inputs and outputs. Its main task is to transmit control signals between the injection molding machine and the BlueLine system.

All outputs of the I/O Master are short-circuit and overvoltage-proof and also protected against reverse polarity. Thanks to the two-color LEDs, the status of the inputs and outputs can be checked at a glance at any time.

Downloads

BlueLine_Maschinenschnittstellen_8980-white

I/O EXPANDER TYPE 8981A

The I/O Expander type 8981A is an expansion module within the BlueLine system with digital inputs and outputs. Its main task is to transmit control signals between the injection molding machine and the BlueLine system.

All outputs are short-circuit and overvoltage-proof and also protected against reverse polarity. Thanks to the two-color LEDs, the status of the inputs and outputs can be checked at a glance at any time.

Downloads

BlueLine_Maschinenschnittstellen_8981-white

BUS INTERFACE TYPE 8982A

The BlueLine Bus Interface type 8982A is used to connect an I/O module series consisting of an I/O Master and one or more I/O Expanders. The modules are then connected to each other using a separately available hybrid bus cable.

I/O Master and I/O Expander modules are coupled directly, i. e. without cables, on a top hat rail bus. The bus interface is used to connect offset or more distant modules to the hybrid bus cable.

Downloads

BlueLine_Maschinenschnittstellen_8982-white

EXTERNAL INTERFACES TYPES 8980C-E & 8981A-E

External interfaces are available for mounting the BlueLine I/O Master and I/O Expander outside the control cabinet. A single I/O Master or I/O Expander is supplied in external housing with a plug connection. Thanks to the compact design, up to 16 switching signals can be processed.

BlueLine_Maschinenschnittstellen_8980c-e-white

EXTERNAL INTERFACES TYPES 8984A & 8985A

The external interface types 8984A and 8985A are control cabinets with visible doors which have been equipped with BlueLine interfaces.

Type 8984A has a BlueLine I/O Master and can be optionally expanded with one to four BlueLine I/O Expanders. Up to a maximum of 64 switching signals (e.g. valve gate nozzles) can therefore be processed.

Type 8985A also has a BlueLine I/O Master but can be optionally expanded with one to six BlueLine I/O expanders. Up to a maximum of 96 switching signals (e.g. valve gate nozzles) can therefore be processed.

Downloads

BlueLine Signal Tester

BLUELINE SIGNAL TESTER

Trust is good - testing is better

In order to obtain error-free measurement results, all components of the BlueLine system must work together without errors at all times. To avoid unpleasant surprises, it is a good idea to check the components from time to time; the best way is to use the BlueLine signal tester type 8952A.

In addition to checking cavity pressure and cavity temperature signals, the BlueLine signal tester can also be used to check other potential sources of errors such as sensor sensitivity or cable breakage. The preset programs can be selected via a display and are immediately ready for use

The BlueLine signal tester is available as a single device or as a complete set in a case.

BLUELINE SIGNAL TESTER TYPE 8952A

With the BlueLine signal tester, individual components within the BlueLine system can be specifically checked.

The signal tester is powered by three 1.5V AA batteries and can be expanded with numerous accessories.

BLUELINE SIGNAL TESTER SET TYPE 8911A

The BlueLine signal tester set includes the following components:

1 × signal tester type 8952A
3 × 1.5V AA batteries
1 × test pin type 6902B
1 × short circuit plug for temperature signals type 9017A
1 × short circuit plug for pressure signals type 9018A
1 × connecting cable between signal tester and test pin type 1041A2
1 × case with foam inlet type 9022A

Downloads

BlueLine Multi-Channel Connector Boxes

BLUELINE MULTI-CHANNEL CONNECTOR BOXES

The thermoelectric voltages of the cavity temperature and charges of the cavity pressure measured in the mold are extremely small measured variables that are susceptible to faults, especially at high mold temperatures.

The quality of the measuring signals depends largely on the connection technology and a safe ground connection to the mold. For this reason, PRIAMUS only uses cable connections with more than one conductor.

Multi-channel connector boxes guarantee a secure ground connection to the mold and can be installed both on the mold surface and integrated into the mold. Depending on the requirements and position of the sensors, the multi-channel connector boxes are installed on the mold.

BLUELINE MULTI-CHANNEL CONNECTOR BOXES

Downloads

BlueLine_Mehrkanal_Stecker_Boxen_1194A_8T-white

MULTI-CHANNEL CONNECTOR BOX FOR CAVITY PRESSURE SIGNALS TYPE 1195-8P

Downloads

BlueLine_Mehrkanal_Stecker_Boxen_1195A_8P-white

BlueLine Accessories

BLUELINE-ZUBEHÖR

Numerous connecting cables are used to ensure that the components within the BlueLine system can communicate with each other as desired. An overview of the most important connection cables and other useful BlueLine accessories can be found in the following PDF file.

Downloads

QFlow Systems Engineering

Quality Monitor™ - The Overall System for easy Process Monitoring

QUALITY MONITOR™ - THE OVERALL SYSTEM FOR EASY PROCESS MONITORING

Quality Monitor™ is used for simple and reliable monitoring of the industrial injection molding process and is based on real process parameters. The basis for this is the process information obtained from the cavity pressure and cavity temperature sensors.

The central component of Quality Monitor™ is the digital data acquisition unit with integrated monitoring software, which can be operated without a PC. With the integrated OPC-UA interface, Quality Monitor™ is the ideal IoT (Internet of Things) platform.

The system can be operated with any web browser-based screen. Ideally, the system is operated together with the QScreen™ control terminal and the multicolor LED signal lamp.

The system is compatible with all PRIAMUS BlueLine devices and can be supplemented with BlueLine amplifiers and machine interfaces depending on the application.

Downloads

Komponentenübersicht an der Spritzgiessmaschine_en

Quality Monitor™ QScreen Control Terminal Type 8281A

QUALITY MONITOR™ QSCREEN® CONTROL TERMINAL TYPE 8281A

The Quality Monitor™ QScreen control terminal has a 7-inch capacitive touchscreen and is used for web browser-based control of the digital data acquisition unit.

The control terminal is connected to the digital data acquisition unit via an Ethernet cable. The data transfer to a local server or a cloud takes place via the OPC UA protocol. User-specific information is stored and system updates are performed via the USB interface.

The VESA interface on the back of the housing is used to fix the operating terminal. In addition, magnetic disks are located on the back of the housing, which allows the QScreen control terminal to be positioned anywhere on the machine.

Downloads

Quality Monitor™ Digital Data Acquisition Unit type 8081A

QUALITY MONITOR™ DIGITAL DATA ACQUISITION UNIT TYPE 8081A

The digital data acquisition unit is the central system component of Quality Monitor™.

The digital data acquisition unit is preferably controlled with the QScreen® control terminal, but can also be controlled with other browser-compatible devices. The digital data acquisition unit receives and processes all input signals. Depending on the configuration, the processed signals are used for process monitoring and output signals can be controlled.

The data is located on a web interface and can also be output as PDF in a quality report if required.

Downloads

Multicolor LED Signal Lamp Type 9023A

MULTICOLOR LED SIGNAL LAMP TYPE 9023A

The multicolor LED signal lamp is directly controlled by the PRIAMUS systems and can be directly connected to the core type 8280C or the QScreen™ control terminal.

It is attached directly to the BlueLine Core with the mounting type 9024A or attached to a desired location on the machine with the magnetic mounting type 9025A.

The signal lamp is controlled as a serial interface via a USB connection and can display more than 200,000 colors (RGB LEDs) and lighting effects.

Downloads

Cavity Pressure Sensors

Standard Cavity Pressure Sensors

STANDARD CAVITY PRESSURE SENSORS

TYPE 6001

Type number	Sensor front	Product properties
6001Ax.x-102	Machinable	-
6001Ax.x-102-H	Machinable, hardened	-
6001Bx.x-102	Machinable	PRIASED^®
6001Bx.x-102-H	Machinable, herdened	PRIASED^®

TYPE 6001B

Sensor with angeled connector

6001Bx.x-102-W kombiniert

Type number	Sensor front	Product properties
6001Bx.x-102-W	Non-machinable	PRIASED^®
6001Bx.x-102-H-W	Non-machinable, hardened	PRIASED^®

TYPE 6002B

6002Bx.x-102 kombiniert

Type number	Sensor front	Product properties
6002Bx.x-102	Machinable	PRIASED^®, PRIASAFE ^™
6002Bx.x-102-H	Machinable, hardened	PRIASED^®, PRIASAFE ^™

TYPE 6002B

Sensor with angeled connector

6002Bx.x-102 kombiniert

Type number	Sensor front	Product properties
6002Bx.x-102-W	Non-machinable	PRIASED^®, PRIASAFE ^™
6002Bx.x-102-H-W	Non-machinable, hardened	PRIASED^®, PRIASAFE ^™

TYPE 6003

6003Ax.x-102 kombiniert

Type number	Sensor front	Product properties
6003Ax.x-102	Machinable	-
6003Ax.x-102-H	Machinable, hardened	-
6003Bx.x-102	Machinable	PRIASED^®
6003Bx.x-102-H	Machinable, hardened	PRIASED^®

TYPE 6003B

Sensor with angeled connector

6001Bx.x-102-W kombiniert (1)

Type number	Sensor front	Product properties
6003Bx.x-102-W	Non-machinable	PRIASED^®
6003Bx.x-102-H-W	Non-machinable, hardened	PRIASED^®

Miniature Cavity Pressure Sensors

MINIATURE CAVITY PRESSURE SENSORS

TYPE 6006BC

6006BCx.x-102 kombiniert

Type number	Sensor front	Product properties
6006BCx.x-102	Machinable	PRIASED^®, PRIASAFE^™

TYPE 6006BC

Sensor with angled connector

6006BCx.x-102-W kombiniert

Type number	Sensor front	Product properties
6006BCx.x-102-W	Non-machinable	PRIASED^®, PRIASAFE^™

TYPE 6007BC

6006BCx.x-102-W kombiniert

Type number	Sensor front	Product properties
6007BCx.x-102	Non-machinable	PRIASED^®, PRIASAFE^™

TYPE 6008AA

6008AAx.x-102 kombiniert

Type number	Sensor front	Product properties
6008AAx.x-102	Machinable	-

TYPE 6010BC

6010BCx.x-102 kombiniert

Type number	Sensor front	Product properties
6010BCx.x-102	Machinable	PRIASED^®, PRIASAFE^™

TYPE 6010BC

Sensor with angled connector

6010BCx.x-102-W kombiniert

Type number	Sensor front	Product properties
6010BCx.x-102-W	Non-machinable	PRIASED^®, PRIASAFE^™

Compact Sensors for Cavity Pressure

COMPACT SENSORS FOR CAVITY PRESSURE WITH QUICK DISCONNECT

Compact Sensors for Cavity PRessure with Quick Disconnect Type A

Type 6001

6001Axxx.xxA_

Type number	Sensor front	Product properties	Possible length L
6001Axxx.xxA	Machinable	-	44 ... 160 mm
6001Bxxx.xxA	Machinable	PRIASED^®	44 ... 160 mm

Type 6002B

6002Bxxx.xxA_

Type number	Sensor front	Product properties	Possible length L
6002Bxxx.xxA	Machinable	PRIASED^®, PRIASAFE^™	46 ... 160 mm

Type 6003

6003Axxx.xxA_

Type number	Sensor front	Product properties	Possible length L
6003Axxx.xxA	Machinable	-	44 ... 160 mm
6003Bxxx.xxA	Machinable	PRIASED^®	44 ... 160 mm

TYPE 6006BC

6006BCxxx.xxA_

Type number	Sensor front	Product properties	Possible length L
6006BCxxx.xxA	Machinable	PRIASED^®, PRIASAFE^™	41 ... 160 mm

TYPE 6008AA

6008AAxxx.xxA_

Type number	Sensor front	Product properties	Possible length L
6008AAxxx.xxA	Machinable	-	50 ... 160 mm

TYPE 6010BC

6010BCxxx.xxA_

Type number	Sensor front	Product properties	Possible length L
6010BCxxx.xxA	Machinable	PRIASED^®, PRIASAFE^™	41 ... 160 mm

COMPACT SENSORS WITH QUICK DISCONNECT TYPE A1

Type 6006BC

6006BCxxx.xxA1_

Type number	Sensor front	Product properties	Possible length L
6006BCxxx.xxA1	Machinable	PRIASED^®, PRIASAFE^™	24 ... 160 mm

TYPE 6008AA

6008AAxxx.xxA1_

Type number	Sensor front	Product properties	Possible length L
6008AAxxx.xxA1	Machinable	-	33 ... 160 mm

TYPE 6010BC

6010BCxxx.xxA1_

Type number	Sensor front	Product properties	Possible length L
6010BCxxx.xxA1	Machinable	PRIASED^®, PRIASAFE^™	24 ... 160 mm

COMPACT SENSORS WITH QUICK DISCONNECT TYPE A2

TYPE 6006BC

6006BCxxx.xxA2_

Type number	Sensor front	Product properties	Possible length L
6006BCxxx.xxA2	Machinable	PRIASED^®, PRIASAFE^™	30 ... 160 mm

TYPE 6008AA

6008AAxxx.xxA2_

Type number	Sensor front	Product properties	Possible length L
6008AAxxx.xxA2	Machinable	-	39 ... 160 mm

TYPE 6010BC

6010BCxxx.xxA2_

Type number	Sensor front	Product properties	Possible length L
6010BCxxx.xxA2	Machinable	PRIASED^®, PRIASAFE^™	30 ... 160 mm

FURTHER INFORMATION AND DOWNLOADS

Data Sheet DS095e Compact Sensors for Cavity Pressure with Quick Disconnect, Ed. 05.21 (6.22 MB)

Flexible Quick Disconnects for Cavity Pressure Sensors

FLEXIBLE QUICK DISCONNECTS FOR CAVITY PRESSURE SENSORS

FLEXIBLE QUICK DISCONNECTS FOR MOUNTING IN MOLD INSERT

Type 6101

6101Ex.xx_

Type number	Compatible with sensor	Delivered mounting nut
6101Ex.xx	Standard cavity pressure sensors Types 6001B, 6002B, 6003B	Types 6541A & 6546A

TYPE 6103

6103Ex.xx_

Type number	Compatible with sensor	Delivered mounting nut
6103Ex.xx	Miniature cavity pressure sensors Types 6006BC, 6007BC, 6010BC	Types 6544B & 6546A

Type 6104

6104Bx.xx_

Type number	Compatible with sensor	Delivered mounting nut
6104Bx.xx	Miniature cavity pressure sensors Type 6008AA	Types 6544B & 6546A

Type 6106

6106Ax.xx_

Type number	Compatible with sensor	Delivered mounting nut
6106Ax.xx	Standard cavity pressure sensors Types 6001A, 6003A	Types 6541A & 6546A

QUICK DISCONNECT CABLE TYPE 6100

6100Ex.x-102

Type number	Compatible with
6100Ex.x-102	All compact sensors for cavity pressure with quick disconnect type A All flexible quick disconnects for cavity pressure sensors

QUICK DISCONNECT CABLE TYPE 6102

6102Ex.xA1-102

Type number	Compatible with
6102Ex.xA1-102	All compact sensors for cavity pressure with quick disconnect type A1

FLEXIBLE QUICK DISCONNECTS FOR MOUNTING IN FLOATING MOLD INSERT

TYPE 6201

6201Ax.xx_

Type number	Compatible with sensor	Delivered mounting nut
6201Ax.xx	Standard cavity pressure sensor Types 6001B, 6002B, 6003B	Types 6541A & 6555A

Type 6203

6203Ax.xx_

Type number	Compatible with sensor	Delivered mounting nut
6203Ax.xx	Miniature cavity pressure sensors Types 6006BC, 6007BC, 6010BC	Types 6544B & 6555A

Type 6204

6204Ax.xx__0

Type number	Compatible with sensor	Delivered mounting nut
6204Ax.xx	Miniature cavity pressure sensor Type 6008AA	Types 6544B & 6555A

QUICK DISCONNECT CABLE TYPE 6200

6200Ax.x-102

Type number	Compatible with
6200Ax.x-102	All BlueLine sensors All compact sensors with flexible quick disconnect for mounting in floating mold insert

Piezoelectric Force Sensors

PIEZOELECTRIC FORCE SENSORS

6411Bx.x-102 (1)

Typennummer	Länge A	Länge B	Länge C	Produkteigenschaften
6411Bx.x-102	6 mm	3.9 mm	6 mm	-
6413Ax.x-102	12 mm	4.1 mm	3 mm	-
6414Ax.x-102	20 mm	8.1 mm	3.5 mm	-
6415Ax.x-102	30 mm	12.1 mm	4 mm	-

FURTHER INFORMATIONS AND DOWNLOADS

Cables for Cavity Pressure Sensors

Connection cables

With Fischer connector type 102 negative TRIAX

Type 1002Dx.x

Compatible with all standard cavity pressure sensors types 6001A and 6003A

Type 1006Cx.x

Compatible with all piezoelectric force sensors type 6411B

Type 1009Bx.x

Compatible with all standard cavity pressure sensors types 6001B, 6002B, 6003B

Type 1010Cx.x

Compatible with all miniature cavity pressure sensors types 6006BC, 6007BC, 6010BC

Type 1011Ax.x

Compatible with all miniature cavity pressure sensors type 6008AA

Type 1019Ax.x

Compatible with all standard cavity pressure sensors with angled connectors types 6001B, 6002B, 6003B

Type 1020Ax.x

Compatible with all miniature cavity pressure sensors with angled connectors types 6006BC, 6010BC

Connection cables

With Fischer connector type S 102 positive TRIAX

Type 1041A